1,Flex cable is compatible with S200, if you already have S200 tester cables then you can only buy the host unit.
2, If you need to buy the cables individually, please Click HERE
One host machine + extension test flex cable to test the display and touch functions of
iPhone 6S/6SP/7/7P/8/8P/X/XS/XS Max/XR/11/11 Pro/11 Pro Max/12/12 Pro/12mini/12 Pro Max
·Test display, touch and 3D touch functions
·True Tone repair
At present, the original color of iPhone12 series only supports the reading function, and the original color restoration is not currently supported.
The whole set of products only includes 6S-12PRromax cable, 6 series cable needs to be purchased separately.
How to operate
1. Get the relevant flex cable buckled with host machine
2. Press ON/OFF button to start the host device.
(The device is powered by inner 3500mAh battery, please get the battery sufficiently charged if device cannot start-up.)
3. Get the screen connected with test flex cable
4. Press UP/DOWN button or slide at the very bottom part of screen to choose the test mode
The touch test with normal test mode and Trace test mode, switch the 2 mode by keep pressing the “MODE” button 3 seconds (hear beep)
In the trace test mode, the trace can be cleaned by press “RECOVER” button
This device also support True Tone repair
With original screen
1. Get only the touch flex cable connected with host device, power on S300
2. Long press “RECOVER” button, the “READ” button will keep flashing, data reading completed when LED light turn to green
3. Tear off the original screen
4. Get the new screen connected, short press “RECOVER” button, “BURN” indicator light will keep flashing, True Tone repair will be completed when LED light turn to green
Without original screen
When restore the True Tone without original screen, need to work with SHALOU Assistant to work
1. Get the phone device connected with computer, and read the MtSN from SHALOU Assist Software. (Copy MtSN from NAND backup page)
2. Save the MtSN as a TXT file, can be named like “itestbox_mtsn_code.txt”
3. Get the S300 host machine connect with computer, copy the file to the device (host machine with USB flash disk function), then turn off the device
5. Get only the touch flex cable connected with host device, power on S300
4. Get the new screen connected, to read the data, wait till the “READ” light turn to green
6. Short press “RECOVER” button, “BURN” indicator light will keep flashing, True Tone repair will be completed when LED light turn to green.( If LED light turn to red, means data burning is failed)
·Product size: 75*156*10mm
·Battery capacity: 3500mAh
·Gross weight: 150g